Backsplash tile for kitchen peel and stick
- Especially designed for kitchen and bathroom backsplash
- The tile is resistant to the heat of the stove and the bathrooms' humidity (Do not use it in the shower).
- With the gel-like surface, it is easy to remove water and stain on the surface, which provides stronger practicality and durability to the tile.
- Artd3dwallpanels carries various collections to meet your different tastes and a means of high-end performance to update the look of your entire room.
Features
 |
 |
 |
 |
|---|---|---|---|
|
Easy to cut and trim with a scissor or utility knife.
|
An easy DIY product, just peel and stick.
|
Heat and moisture resistance.
|
Easy maintenance, just clean with a damp cloth.
|
Installation Steps
Notes: Make sure your wall surface is thoroughly dry and clean and read the non-recommended surfaces.
Apply to flat and smooth surfaces. If the wall is painted, sand the paint in advance.
1. Cut the tile's jagged edge off to make a straight side as your start the point (keep the small pieces).
2. Peel the backing off and stick it on the wall from the starting corner of the wall.
3. Apply the following tiles by overlapping the blank areas indicated "overlap here" to ensure it is in line with the first one.
4. Continue to overlap the first row until all the areas are done.
5. Use the small pieces left in step 1 to stick on the jagged side of the last tiles
6. Finish another row.
If there are outlets or windows, don't uncover the backing cover first. please initially measure, mark, and trim the tiles.
.jpg)
