Mini subway design adhesive wallpaper, pack of 10 covers 9.5 Sq.ft. Backsplashes wall tile for bathroom and kitchen countertops, easy to installation, no tools and no grout.

Product Parameter

Design Code: A17002
Brand: Art3D
Size of Tile: 285 * 305mm (11.2" X 12")
Thickness: Around 2 mm (0.08")
Principal Ingredients: Epoxy resin + PET back
Nominal Finish: Epoxy resin + PET back
Gross Weight: 1.5 Kgs per box (± 0.3 kgs)
Standard Packaging: Carton box package, 10 tiles in one package
Customization: Available for order over 200 square meter
Notes: Patterns, photos and drawings are for illustration purposes only. Final production may vary.

Product Features

Easy DIY peel and stick tile concept of mosaic sticker smart tile is made of an adhesive substrate topped with a gel component called epoxy resin, the embossed 3d epoxy resin offers stunning visual impact. the tiles are thin and light, they can be installed in minutes over a clean and sleek surface without any mess or specialized tools, and never crack with time. Bathroom backsplash wall tile is also an economic wall covering material, if you are getting tiled of the same design, just peel them off and change a new style. Art3dTM mosaic sticker offers veracious collections to meet you different taste. Bathroom backsplash wall tiles are lightweight, easy to handle, cut and maintain, they will remain on your walls for as long as you wish them to be. The tiles can also be easily installed directly over existing panels or smooth surface. Especially designed for kitchen backsplashes and bathroom backsplashes, the tiles are resistant to the heat of stovetops and the humidity of bathrooms (do not use in shower).

  • Bathroom backsplash wall tile
  • Do it yourself, easy cut and trim, no grout, no glue, no special tools and no mess
  • Lightweight and thin, easily installed directly over existing panels or smooth surface
  • Extremely suit for kitchen backsplashes and bathroom backsplashes
  • Guaranteed to stick to your walls

  Art3dTM backsplash sticker is a peel & stick wall tile, it is a simplified and economics wall material and its relative easy to finish your wall covering in anytime almost instantly.

Peel and Stick Tile

Peel and Stick Tile

Peel and Stick Tile

Peel and Stick Tile

Peel and Stick Tile

Peel and Stick Tile

Art3dTM backsplash sticker has a protective layer of plastic on the top, which help to prevent dust when installation.

 

Installation Guide

Back splash is very easy to install, for detailed installation guide and video guide, please visit backsplash sticker installation guide

Kitchen Backsplash Wall Tile Application

Kitchen backsplash tile is an ideal wall covering product that can be used in interior decoration, it can be used in wet environment such as bathroom and kitchen room, please note that it can't use in shower. Kitchen backsplash wall tile is especially designed for kitchen backsplashes and bathroom backsplashes, it can be stick on wall or remove easily. Other than that, kitchen backsplash tile can also use in glass door or screen decoration, or stick on cabinet door. Note: please note that backsplash wall tile can't use in shower.

Customer Review

Contents: Very thin. other than that, it is good

Contents: Very easy to pop up, very nice backsplash tiles

Contents: Easy and simply beautiful

Contents: Received earlier than expected

Good product

Contents: Used this as the backsplash of my kitchen. I really like the way it looks like real tile. I wish there were better directions on how to put it up because there isnt a lot of info. We have also had some start to come off the wall but that could be because I would stick then unstick then stick again to make sure it was perfectly aligned. Overall I really like it as a cheap way to do a backsplash.

Was easier than I expected and looks amazing

Contents: This brought new life to my super boring kitchen! This was much easier than I thought and was really worried about taking on this project but I'm glad I did. Here is what I did. Preparation was sanding the painted wall smooth and remove the old nasty sealant from the top of my counter-top. Used a power sander and the ALLWAY TOOL CT31 3 in 1 for caulk removal and smoothing of new caulk once applied (after the back splash was put up). This took a while to get that nasty gummy old sealant up. Once finished sanding I cleaned up my mess and wiped down the walls with light soap and water towel ensuring all the dust particles were up. Once completely dry, I used a cheap little black and decker laser level to make sure my line was straight. This didn't help me much since my counter top wasn't exactly level but it did provide me with a guide. I still measure out a few random points and marked them with a pencil to ease my OCD. Using an large Amazon box cut open and spread across the floor with trash bags around it I got my first 12x12 back-splash tile and removed the backing. Holding it low and close to the old Amazon box I sprayed it with 3M adhesive spray (recommended from the included instructions). This might be a no brainer but I'll throw it out there cause I did it.....I cut the staggered ends off one tile (the first tile) and place that one on the wall cause the next tile you place will overlap the first one. I just put the first tile on the wall and didn't consider the placement of the next. Staggered end will overlap the previous tile. Continued to place tiles against the wall one after another doing my best to keep them level. Don't worry if you get a bit off level, a slight offset isn't very noticeable and is correctable with the next tile. I started at the top staggered edge and worked left to right using my hands to ensure it was firmly up against the wall and overlapping the previous tile. Cutting around light switches and electrical outlets was not that hard. Before I peeled the waxy back off revealing the adhesive, I would line it up on the wall to check where the light switch/outlet was and using an exact-o knife I cut a small square out. I cut small each time because I figured it would be better to keep cutting a little more than cutting to much and my patience payed off. I did my best to just cut around the metal enclosure box that houses the outlet or switch. Once it laid flat against the wall, I peeled, sprayed, put it on the wall and put the outlet cover back up. That is pretty much it. I took a lot of breaks; found this at times to be a bit nerve racking. Working under my cabinets with poor lighting trying my best to be as accurate as possible. Rounding a corner was easier than I thought as well. Just keep pressing all the way up to the corner and then press it into the corner. Lastly I added my sealant to the top of the counter top, let it dry, cleaned up my mess, wiped my back splash down with a damp towel for a last minute check for bubbles. Took me over three hours from start to finish.

Contents: Excellent quality, we are super impressed that we spent less than a hundred dollars for beautiful backsplash. VERY sticky. Love that it comes in a pack of 6.

It's pretty and gave more character to the kitchen

Contents: It's pretty and gave more character to the kitchen. But had to reinforce with liquid nails in some places. The walls in my old apartment are not very even though.

Love, love, love it!

Contents: What a great improvement this made to my foyer wall, I LOVE it!!! It was so easy, sticks well to the smooth surface, this took about an hour.It took 2.1 boxes of tile. I will have to do around the front door with the left over tiles. It was so much more cost effective over real glass tiles!! I wish the before pictures took but here is the after, a real pop!! I'm ordering different colors for my bathroom now. Love these!!

Save time and money, buy this!

Contents: Very nice for the price, sticks right on fits on nicely. Bought adhesive spray for extra stick and it seems to be holding very good.

21-30